Lattice Configurator

Lattice Configurator

Location

Duskstruck Moors
(Brisban Wildlands)

Part of

Assist Ulta Metamagicals with their asura gate research

Interact

Yes

Destructible

No

Other images

The configurators can be found scattered across the area.

Lattice Configurators are objects used to solve mathematical problems to help tune asura gates. They are located in Duskstruck Moors in Brisban Wildlands as a part of the Assist Ulta Metamagicals with their asura gate research renown heart.

Heart involvement

Assist Ulta Metamagicals with their asura gate research (24)

Dialogue

Analyze ratios of blue to green crystals. Lattice 1 ratio = 1:3. Lattice 2 ratio = 6:15. Lattice 3 ratio = 5:12. Identify lattice with lowest ratio.

Lattice 1

Identification confirmed. Crystal tuning completed.

Thank you.

Lattice 2

Ratio incorrect. Restoring initialization protocol.

I'll have to try again.

Lattice 3 (Same failure response as above)

None. All ratios are equivalent. (Same failure response as above)

Never mind.

Analyzing crystal lattice dimensions. Length: 5.8 units. Width 3.8 Units. Calculating area. Calculation complete. User verification?

9.6 units

Verification incorrect. Analysis incomplete.

Hmm, that wasn't right.

19.2 units (Same failure response as above)

22.04 units

Verification correct. Analysis complete. Crystal tuning completed.

Happy to have helped!

61.08 units (Same failure response as above)

This seems beyond me.

Crystal 1 weight: 7.2 units. Crystal 2 weight: 6.7 units. Estimated weight of merged crystal: ERROR. User input required.

13.9

Input received. Merge successful. Crystal tuning completed.

Thank you.

48.24

Input received. WARNING! Data does not match sample set. Shutting down analysis.

I'll have to try again.

0.5 (Same failure response as above)

1.07 (Same failure response as above)

Never mind.

Crystal density: 2.99. Warning! Crystal density reduced by 5 percent. ERROR: Calculation incorrect. User input required. Approximate density?

2.96

Applying value. ERROR: Calculation Incorrect.

I'll have to try again.

2.84

Applying value. Calculation correct! Crystal tuning completed.

Thank You

2.78 (Same failure response as above)

2.72 (Same failure response as above)

Never mind.

Crystal depository capacity: 4,250 units. Average crystal size: 170 units. Identify maximum quantity of crystals that will fit depository.

15

Incorrect quantity. Reset parameters.

Hmm, that wasn't right.

22 (Same failure response as above)

25

Correct quantity. Crystal tuning completed.

Happy to have helped!

18 (Same failure response as above)

I don't know.

Crystal inventory: 29 blue crystals, 12 green crystals. Confirm ratio of blue crystals to green crystals.

41:12

Inputting value. ERROR: Ratio incorrect. System error.

Hmm, that wasn't right.

29:24 (Same failure response as above)

12:29 (Same failure response as above)

29:12

Inputting value. Ratios correct. Distributing crystals to network.

Happy to have helped!

I don't think I understand the question.

Crystal lattice density increased by 125 units. Original density: 818 units. Confirm density increase.

933 units

Confirmation failed. Analysis incomplete.

Hmm, that wasn't right.

693 units (Same failure response as above)

125 units

Density increase confirmed. Analysis complete. Crystal tuning completed.

Happy to have helped!

570 units (Same failure response as above)

I give up.

Crystal output increases: 6, 18, 30, 42. Using current pattern, identify estimated output next cycle.

56

ERROR: Estimated output incorrect. Restarting analysis cycle.

I'll have to try again.

54

Estimated output accepted. Crystal tuning completed.

Thank you.

60 (Same failure response as above)

52 (Same failure response as above)

Never mind.

Crystal profile analysis error. Length: 12 units long, 5 units wide. Perimeter value miscalculated. Verify perimeter:

17

Applying value. ERROR: Calculation incorrect.

I'll have to try again.

34

Applying value. Calculation correct! Crystal tuning completed.

Thank you.

60 (Same failure response as above)

7 (Same failure response as above)

Never mind.

Crystal sample set inventory: 7 blue, 3 yellow. Crystals sampled 10 times. Input best prediction possible of selecting yellow crystals?

7

ERROR: Prediction incorrect. Restarting analysis cycle.

I'll have to try again.

3

Prediction accuracy confirmed. Crystal tuning completed.

Thank you.

10 (Same failure response as above)

5 (Same failure response as above)

Never mind.

Crystal samples observed with following number of sides: 3, 6, 8, 7, 10, 12, 4. Identify range of number of sides.

15

Incorrect value for range. Observation data reset.

Hmm, that wasn't right.

12 (Same failure response as above)

9

Correct range identified. Crystal tuning completed.

Happy to have helped!

8 (Same failure response as above)

I don't know the answer.

Crystal structure Alpha: 3 units long, 7 units wide. Crystal structure Gamma: 6 units long, 4 units wide. Identify Gamma's area relative to Alpha.

Gamma's area is less than Alpha's.

Checking areas. ERROR: Incorrect comparison. Resetting text parameters.

Hmm, that wasn't right.

Gamma's area is equal to Alpha's. (Same failure response as above)

Gamma's area is greater than Alpha's.

Comparison completed. Area relativity confirmed. Crystal tuning completed.

Happy to have helped!

I don't know. (Same failure response as above)

I can't figure it out.

Modulation array capped at 17,000 Oscillations in 7 hours, 27 minutes. Estimated duration to achieve cap at 40 oscillations per minute?

7 hours, 12 minutes

Inputting value. ERROR: Modulation array failure. Performing system restart.

Hmm, that wasn't right.

6 hours, 56 minutes (Same failure response as above)

7 hours, 48 minutes (Same failure response as above)

7 hours, 5 minutes

Inputting value. Modulation array online. Crystal tuning efficiency improved!

Happy to have helped!

I give up.

Sample 35: Crystal, 5 units long, 6 units wide, 2 units deep. Volume = WARNING: Volume calculation unconfirmed. Manual input required.

60 cubic units

Volume confirmed. Crystal tuning completed.

Happy to have helped!

30 cubic units

Crystal volume not confirmed. Crystal rejected.

Hmm, that wasn't right.

22 cubic units (Same failure response as above)

13 cubic units (Same failure response as above)

Hmm, let me think about it.

Sample 236: Crystal lattice, refractive angle 72 degrees. Crystal bisection underway. ERROR: resulting refraction angles miscalculated. Input manual correction:

144

Checking angles. ERROR: Refraction scattering too dense. Failure imminent.

I'll have to try again.

36

Verification correct. Analysis Complete. Crystal tuning completed.

Happy to have helped!

164 (Same failure response as above)

0 (Same failure response as above)

Never mind.

Sample 815: Crystal lattice area _ 1,512 units. Crystal lattice perimeter _ 174 units. Identify crystal dimensions.

756 units by 87 units.

Inaccurate dimensions. Sample discarded.

I'll have to try again.

63 units by 24 units.

Dimensions confirmed. Crystal tuning complete.

Thank you.

72 units by 18 units. (Same failure response as above)

57 units by 29 units. (Same failure response as above)

Never mind.

Scaling configuration malfunctioning. Crystal lattice 14 units long, 22 units wide. Figure correct dimensions for scaling by 3.

17 units long, 25 units wide.

Checking dimensions. ERROR: Incorrect scaling factor. Sample destroyed.

Hmm, that wasn't right.

34 units long, 50 units wide. (Same failure response as above)

42 units long, 66 units wide.

Checking dimensions. Scaling factor confirmed. Crystal tuning completed.

Happy to have helped!

32 units long, 56 units wide. (Same failure response as above)

I'm not sure.

Scanning crystal. WARNING! Corrupted analysis data structure. Sequence Incomplete: 4, 8, _, 32, 64, _ . Input missing data.

16, 128

Data input. Analyzing data structure. Structure intact. Crystal tuning completed.

Thank you.

24, 160

Data Input. Analyzing data structure. WARNING! Data structure unstable. Shutting down analysis.

I'll have to try again.

12, 84 (Same failure response as above)

20, 140 (Same failure response as above)

Never mind.

Successful alignments in cycle one: 25. Successful alignments in cycle two: 33. Identify percentage increase of successful alignments.

32 percent

Volume confirmed. Crystal tuning complete.

Happy to have helped!

8 percent

Crystal volume not confirmed. Crystal rejected.

Hmm, that wasn't right.

16 percent (Same failure response as above)

20 percent (Same failure response as above)

I need to consider this.

Warning. Probability calculator damaged. 18 samples analyzed. 6 samples destroyed in analysis. Estimate probability of crystal destruction in next analysis.

1/3 probability

Probability accurate, within acceptable parameters. Crystal tuning completed.

Thank you.

1/2 probability

Probability incorrect. Unable to proceed. Resetting analysis.

I'll have to try again.

3/5 probability (Same failure response as above)

1/18 probability (Same failure response as above)

Never mind.